PVD Coating
In-house PVD coating in Jeddah - vacuum-bonded titanium colour on SS304/316: champagne gold, rose gold, bronze, black and bespoke tones.
In-house PVD coating in Jeddah - vacuum-bonded titanium colour on SS304/316: champagne gold, rose gold, bronze, black and bespoke tones.
What PVD coating is
Physical Vapour Deposition bonds a thin titanium-based layer to stainless steel inside a vacuum chamber. The result is a dense, decorative colour that resists scratching, tarnish and UV far better than paint - ideal for high-touch architectural surfaces.
Colour palette
- Champagne Gold - our signature warm tone
- Rose Gold
- Bronze
- Black
- Titanium
- Copper
- Plus bespoke tones matched to your sample
Technical specifications
| Base metal | SS304 / SS316 |
| Finish family | PVD (titanium/zirconium based) |
| Base surface | Mirror 8K / Satin No.4 / Hairline |
| First-article tolerance | Millimetre-accurate, to drawing |
| Quality | 4 hold points / inspected to samples |
| Colour matching | Single batch per project |
| Lead time | Quoted per project |
Where it is used
Hotel lobbies and feature walls, lift interiors, reception desks, retail storefronts, signage, railings and mashrabiya screens.
Quality control
Every PVD piece passes four hold points - post-cutting, post-welding, post-polishing and post-coating - and is signed off for tone, coverage and finish before release.
PVD coating for architects and contractors
Specifying PVD stainless steel for a hotel, mall, office or villa in Jeddah or elsewhere in Saudi Arabia? We cut, weld, polish and PVD-coat in our own Jeddah facility, so one team is accountable from shop drawing to finished panel, and we supply projects Kingdom-wide.
What to send us
- Drawings or a dimensioned sketch
- The tone you want, or a sample to match
- Quantities and project location
- Project stage: design, tender or construction
What you get
- A sample in the approved tone before production
- One coating batch per project, inspected against the approved sample
- Four quality hold points from cutting to coating
- A reply within one business day
Choosing the base metal for Jeddah's coastal air
PVD adds colour and scratch resistance, but the stainless grade underneath still governs corrosion at edges, welds and drilled holes. Interiors such as hotel lobbies, retail fit-outs and lift cars normally use SS304. Exterior cladding, entrance portals, railings and anything within reach of sea spray use SS316, polished to the required finish and then coated in a single batch. Read 304 or 316 for coastal façades in Jeddah.
PVD projects and guides
- Five-star hotel in champagne-gold PVD, Jeddah
- Five-star hotel in matte-black PVD, Jeddah
- PVD metal cladding for façades, walls and columns
- PVD mashrabiya and decorative screens
- Stainless steel railings and stairs
- PVD coating vs electroplating: which to specify
- How to clean and maintain PVD stainless steel
PVD coating — frequently asked questions
What is the difference between PVD coating and electroplating?
PVD bonds a thin titanium- or zirconium-based layer to polished stainless steel inside a vacuum chamber, so it resists scratching, tarnish and UV without lacquer. Electroplating deposits gold, chrome, nickel, brass or copper in a chemical bath; it suits brass and cast pieces but is softer and usually needs lacquer on high-touch surfaces. Both processes run in our Jeddah facility. See PVD coating vs electroplating.
Can PVD-coated stainless steel be used outdoors in Jeddah?
Yes. For façades, entrance portals and railings within reach of sea spray we specify SS316 as the base metal, polish it to the required finish and coat it in a single batch. A fresh-water rinse every one to three months keeps salt off the surface.
Will the colour match across every panel of a project?
Yes. Each project is coated in a single batch and inspected against an approved sample under controlled light, so the tone stays consistent from panel to panel.
How do I clean and maintain PVD stainless steel?
Wipe with a soft microfibre cloth and warm water with a few drops of neutral soap, then rinse and dry. Avoid abrasive powders, scouring pads, bleach and chloride cleaners. Full routine in our PVD care guide.
How long does PVD coating take and how do I get a quote?
Lead time is quoted per project because it depends on quantities, base finish and fabrication. Send drawings or a sample through our Request a Quote page or on WhatsApp +966 54 655 2741 and we reply within one business day.
Send your drawings or a finish sample — we reply within one business day.