Guides & FAQs · Materials

Stainless Steel, Brass or Aluminium: Which Metal to Specify?

The metal you specify decides how a piece is made, how it is finished and how it looks after ten summers in Saudi Arabia. The same mashrabiya screen can be drawn once and built in SS316, brass or aluminium, and each version will cost differently, weigh differently and age differently. This guide sets out how we choose between them in our Jeddah workshop, element by element.

The six metals we work with

SS304 stainless steel is the standard for dry interiors: trims, skirtings, counters, screens and furniture. It polishes to mirror or hairline and takes PVD coating. SS316 stainless steel adds molybdenum, which resists the chloride-rich air of Jeddah and every other coastal city; it is the grade for exteriors, pools, washrooms, kitchens and anything near the sea, and it takes the same finishes as SS304. Brass gives natural warmth indoors, machines and casts beautifully for handles, frames and lamps, and is electroplated or lacquered; it tarnishes outdoors. Aluminium is light and corrosion-resistant once powder-coated, which makes it the choice for large screens, pergolas, cladding sheets and signage where weight and span matter. Steel gives strength at low cost for hidden frames and sub-structures, and powder-coated or 2K-painted for gates and visible structure. Corten develops a stable rust patina for outdoor sculpture and landscape features.

Choose by location first

Location settles most decisions before aesthetics enter. Outdoors and within reach of sea air: SS316 or powder-coated aluminium, never SS304 or bare steel. Wet interiors such as washrooms, spas, pools and kitchens: SS316. Dry interiors: SS304 or brass. High-touch surfaces such as handrails, handles, counters and door hardware: stainless steel with PVD, because it resists scratching and cleaning chemicals without lacquer. Lightweight or long-span elements such as ceiling screens, pergola louvres and large façade panels: aluminium on a stainless or steel frame.

Then choose by finish

The finish you want often decides the metal. PVD tones such as champagne gold, rose gold, bronze and black are applied to polished or brushed stainless steel only, so a gold mashrabiya that must survive daily cleaning is made in stainless, not brass. Electroplating deposits gold, chrome, nickel or brass tones in a chemical bath and suits brass and cast pieces; it is protected with lacquer and kept to low-contact decorative parts. Powder coating and 2K paint give opaque RAL colours and belong on aluminium and steel. A single project usually mixes all three: PVD on the visible stainless, powder on the aluminium louvres and the hidden steel frame, plating on brass lamp parts.

Weight, strength and span

Stainless steel and steel carry load: railings, gates, staircases, suspended sculptures and the sub-frames behind cladding. Aluminium weighs roughly a third as much, which is why large screens, pergola roofs and ceiling panels are lighter, safer to install and kinder to the building structure when made in aluminium. Brass is heavy and soft, so it is reserved for details rather than structure. When a design calls for a brass appearance on a large or load-bearing element, we build it in stainless steel with a brass-toned PVD finish.

Cost, in order

For the same drawing, aluminium with powder coating is usually the most economical, SS304 next, SS316 above it, and brass the most expensive because of raw material price and the hand finishing it needs. PVD adds to the stainless price but removes the lacquer maintenance that plated brass requires, so over a hotel's operating life PVD-coated stainless is often the lower cost. We price each element in the grade and finish that its location needs, not in a single grade for the whole project.

Quick comparison

MetalBest forFinishesAvoid
SS304 stainlessDry interiors, trims, screens, furnitureMirror, hairline, satin, PVDExteriors and wet areas in coastal cities
SS316 stainlessExteriors, pools, washrooms, kitchens, railingsMirror, hairline, satin, PVDNothing within reason; it is the safe choice
BrassIndoor handles, frames, lamps, decorative detailsPolished, electroplated, lacqueredExteriors, high-touch counters, large panels
AluminiumLarge screens, pergolas, cladding sheets, signagePowder coating, 2K paintLoad-bearing railings and gates
SteelHidden frames, sub-structures, driveway gatesPowder coating, 2K paintExposed coastal use without coating
CortenOutdoor sculpture and landscape featuresNatural rust patinaSurfaces that must stay clean or be touched

Questions to settle with your manufacturer

  • Which grade is proposed for each element, and is it written on the shop drawing?
  • Can the mill certificate for the stainless sheet be shown?
  • Which finish will each metal receive, and is it applied in-house?
  • Where are dissimilar metals joined, and how is galvanic corrosion avoided?
  • What is the care routine for each finish after hand-over?

How Royal Decoration applies this

We fabricate and finish SS304, SS316, brass, aluminium, steel and corten in our own facility in Jeddah, with laser cutting, forming, welding, polishing, PVD coating, electroplating and powder coating all under one roof. Material selection is part of the service: each element is drawn in the grade and finish its location needs, confirmed against a physical sample and coated in a single batch. Read our related guides on SS304 versus SS316 for coastal façades and PVD versus electroplating, or send your drawings for a quotation within one business day.

Choosing a metal: frequently asked questions

Which metal is best for exterior metalwork in Jeddah?

SS316 stainless steel for anything touched or seen up close, and powder-coated aluminium for large, lightweight screens and pergolas. Both resist the humid, salty air that stains SS304 and plain steel.

Can brass be used outdoors?

Brass can be used outside, but it tarnishes and patinas quickly in coastal air unless lacquered and maintained. For a brass look outdoors we normally specify SS316 stainless steel with champagne gold or bronze PVD instead.

Is aluminium strong enough for railings and gates?

For handrails and gates that take load we use stainless steel or steel frames; aluminium is used for lightweight infill panels, screens, pergolas and signage, where its low weight is an advantage.

Which metal takes PVD coating?

PVD is applied to polished or brushed stainless steel, which gives champagne gold, rose gold, bronze and black tones that need no lacquer. Brass is electroplated instead, and aluminium and steel are powder-coated or painted.

Choosing a metal for your project?

Send us your drawings or a photo of the space. We reply with a quotation within one business day.

Request a quote
Royal Decoration · Jeddah · Updated November 2026