Guides & FAQs · Choosing a manufacturer

How to Choose a Metalwork Manufacturer in Saudi Arabia

Architectural metalwork is one of the last trades on a project where a weak supplier can still undo months of design work: a cladding panel that oil-cans in the sun, a railing that rusts in its first year by the sea, a gold finish that fades after one season of cleaning. Developers, consultants and fit-out contractors in Saudi Arabia therefore need a way to compare manufacturers on what matters before the purchase order. The seven checks below are the ones we use ourselves when we audit a new project.

1. Manufacturer, trader or installer?

Three kinds of companies answer a metalwork enquiry. A manufacturer owns the laser cutter, the press brake, the welding bays, the polishing line and the finishing plant, and employs the people who run them. A trader imports finished or semi-finished pieces and resells them. An installer fixes what others made. Each has a place, but only the manufacturer controls tolerances, lead times and repairs from raw sheet to installed piece. Ask directly: which processes happen inside your own facility, and which are subcontracted?

2. Check the material grades being proposed

Two stainless steel grades cover most architectural work. SS304 is the standard for dry interiors. SS316 contains molybdenum and resists the chloride-rich air of Jeddah, Dammam, Jubail and every other coastal city, so it belongs on façades, pool areas and anything near the sea. Brass gives natural warmth indoors; aluminium keeps weight down on large screens and exterior panels. A manufacturer should state the grade on the shop drawing and be able to show the mill certificate for the sheet it bought.

3. Understand the finish technology

The finish is what the client sees for the next twenty years, so it deserves more than a colour name. PVD coating bonds a thin titanium- or zirconium-based layer to polished or brushed stainless steel inside a vacuum chamber; it resists scratching, tarnish and UV without lacquer and is the right choice for handrails, door hardware and any surface that is touched and cleaned daily. Electroplating deposits gold, chrome, nickel, brass or copper in a chemical bath and suits brass and cast pieces, protected with lacquer. Powder coating and 2K paint give opaque RAL colours on aluminium and steel. Ask which process will be used on each element, and whether that process is run in-house.

4. Ask how quality is controlled

A documented quality system tells you what happens when something goes wrong, which is the moment that matters. Look for shop drawings issued for approval before cutting, a first-article sample approved before the batch, and hold points where work stops for inspection. In our own facility the cycle is ISO-9001-aligned with four mandatory hold points: after cutting, after welding, after polishing and after coating. Millimetre-accurate first-article tolerance is the standard we hold ourselves to, and the one you should ask any manufacturer to demonstrate.

5. Look at delivered projects in your sector

Hotel work demands finishes that survive housekeeping chemicals and thousands of hands; retail needs fast, repeatable fixtures that look identical across branches; luxury residential needs single pieces fitted to a finished interior without damage. Ask for projects in your sector, and ask to visit one that was installed at least a year ago. Photographs on a website show how a piece looked on hand-over day; a site visit shows how the finish and the fixings have aged.

6. Documents and compliance

Confirm the basics before the technical review: a valid commercial registration, VAT registration, a company profile that names the facility, and, for government or large corporate projects, the supplier registrations those clients require. A company that cannot produce these quickly will struggle with the submittals a consultant will ask for later.

7. Programme, installation and after-care

Ask who installs: a manufacturer with its own installation team can fix levels, joints and fixings with the people who made the parts, and can repair a damaged finish on site. Ask what care instructions come with the work, because PVD, electroplated and painted surfaces each need different cleaning. Finally, measure responsiveness from the first contact: a manufacturer that returns a quotation within one business day of receiving drawings is usually the one that will answer the phone during installation.

A checklist of questions to ask

  • Which processes run inside your own facility: laser cutting, bending, welding, polishing, PVD, electroplating, powder coating?
  • Which stainless grade do you propose for this location, and can you show the mill certificate?
  • Which finish technology will be used on each element, and why?
  • Will you issue shop drawings and a first-article sample for approval?
  • Where are your inspection hold points, and who signs them?
  • Which projects in my sector can I visit?
  • Who installs, and who repairs a finish damaged on site?
  • What care instructions and documents are handed over at completion?
  • How quickly do you return a quotation once drawings are sent?

Manufacturer, trader or installer: what you actually get

Manufacturer with in-house finishingTrader or importerInstaller only
Who makes the pieceIts own workshopA factory it does not control, often abroadNobody; it fixes what it is given
Control of tolerancesFull, from sheet to installed pieceLimited to what arrivesNone
Finish repair on siteYes, with the same processReplacement or touch-up onlyTouch-up only
Lead-time controlDirectDepends on shipping and the source factoryDepends on the supplier
Single point of accountabilityYesShared with the source factoryShared with the supplier

Where Royal Decoration fits

Royal Decoration (Alrawnaq Advanced for Contracting Co.) is a manufacturer in Jeddah. Laser cutting, V-grooving and bending, forming and rolling, welding, stainless fabrication, polishing, surface finishing, PVD coating, electroplating, powder and 2K paint and assembly all run inside our own facility under one ISO-9001-aligned quality system with four hold points. We supply hotels, retail, restaurants, malls and luxury residences across Saudi Arabia, install with our own team, and return a quotation within one business day of receiving your drawings. Request a quote, or read our guides on SS304 versus SS316 for coastal façades and PVD versus electroplating.

Choosing a metalwork manufacturer: frequently asked questions

What is the difference between a metalwork manufacturer and a supplier?

A manufacturer owns the machines and the people: it cuts, forms, welds, polishes and finishes the metal itself. A supplier or trader buys finished or semi-finished pieces from factories, often abroad, and resells them, so it cannot control tolerances, lead times or repairs in the same way.

Which stainless steel grade should I ask for in Jeddah or other coastal cities?

SS316. It contains molybdenum and resists the chloride-rich coastal air that stains SS304 over time. SS304 remains a good choice for dry interiors.

Is PVD coating better than electroplating for architectural metalwork?

For stainless steel surfaces that are touched and cleaned daily, yes: PVD is harder and needs no lacquer. Electroplating remains the right choice for brass and cast pieces and for classic warm tones. Powder or 2K paint covers opaque colours on aluminium and steel.

How quickly should a serious manufacturer respond to a quotation request?

With drawings in hand, a well-organised manufacturer can confirm the scope and return a quotation within one business day. Royal Decoration commits to that response time for drawings sent through its quote page.

Comparing manufacturers for a project?

Send us your drawings or a photo of the space. We reply with a quotation within one business day.

Request a quote
Royal Decoration · Jeddah · Updated November 2026