metal casting

Metals are cast into shapes by melting them into a liquid, pouring the metal into a mold, and removing the mold material after the metal has solidified as it cools. The most common metals processed are aluminum and cast iron. However, other metals, such as bronze, brass, steel, magnesium, and zinc, are also used to produce castings in foundries. In this process, parts of desired shapes and sizes can be formed.

Casting is most often used for making complex shapes that would be difficult or uneconomical to make by other methods.

 

Sand casting

Sand casting, also known as sand molded casting, is a metal casting process characterized by using sand as the mold material. The term “sand casting” can also refer to an object produced via the sand casting process. Sand castings are produced in specialized factories called foundries. Over 60% of all metal castings are produced by sand casting process.

Molds made of sand are relatively cheap, and sufficiently refractory even for steel foundry use. In addition to the sand, a suitable bonding agent (usually clay) is mixed or occurs with the sand. The mixture is moistened, typically with water, but sometimes with other substances, to develop the strength and plasticity of the clay and to make the aggregate suitable for molding. The sand is typically contained in a system of frames or mold boxes known as a flask. The mold cavities and gate system are created by compacting the sand around models called patterns, by carving directly into the sand, or by 3D printing.

There are six steps in this process:

  1. Place a pattern in sand to create a mold.
  2. Incorporate the pattern and sand in a gating system.
  3. Remove the pattern.
  4. Fill the mold cavity with molten metal.
  5. Allow the metal to cool.
  6. Breakaway the sand mold and remove the casting.

We in Royal Decoration clean the castings, then treat the unclean surfaces and polish them and plating them to get products with luxurious finishes.

 

 

0/5 (0 Reviews)

Samples metal casting


سبك المعادن

السبك أو الصب هي عملية تشكيل معدن عن طريق صهره، ثم صبه سائلاً في قالب به فجوات ذات شكل وأبعاد، فيكتسب المعدن المنتج «المسبوك» شكلها ومقاساتها عندما يتصلب. يمكن اعتبار المصبوب منتجًا نهائيًا أو اعتباره منتجًا نصف مصنع، حيث تجرى عليه عمليات التشطيب باستخدام آلات التشغيل بالقَطع التي تنظفه وتزيل الزوائد الموجودة به.

يستخدم السبك في تصنيع قطع ذات أشكال معقدة، يصعب معها اقتصاديًا تصنيعها بطرق أخرى.

 

السبْك في قوالب رملية

يستخدم فيها رمل ذو خواص مناسبة لتصنيع القالب المستخدم في عملية السبك، حيث يستخدم القالب مرة واحدة. فبعد تجمد المسبوكة يُحطم القالب الرملي وتستخرج المسبوكة. ويمكن استخدام الرمل عدة مرات مع إضافة بعض المواد الرابطة.

هناك ست خطوات في هذه العملية:

  • وضع التصميم المطلوب في الرمال لإنشاء قالب.
  • عمل فتحات بداية ونهاية للقالب لسكب المعدن المنصهر .
  • ازالة التصميم المطلوب من قالب الرمل .
  • ملء تجويف القالب بالمعدن المنصهر.
  • ترك المعدن حتى يبرد .
  • ازالة القالب الرملي وإزالة التصميم المصبوب .

نحن في رويال ديكوريشن نقوم بتنظيف المسبوكات ، ثم نعالج الأسطح غير النظيفة والزائدة ونلمعها ونطليها بأنواع الطلاء الفاخرة للحصول على منتجات ذات تشطيبات فاخرة.

 

 

 

 

0/5 (0 Reviews)

Samples سبك المعادن


4u-store markh-store